Chargeur/Déchargeur/Equalizer
Powerpal 4 Multi
Etronix




Tired of charging one battery at a time? Try the PowerPal 4! This charger allows you to plug 4 batteries into one charger simultaneously, and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. To top it off, the batteries being charged do not even need to have the same configuration. You can connect different types Ni-MH/Ni-CD/LiPo/LiFe batteries into any of the charging ports. No more staying up late for charging batteries.

PowerPal 4 employs the circuit that has maximum output power of 200W. As a result it can charge or discharge 15 cells of NiCd/NiMH at 5.0A and 8 series of Lithium Batteries with maximum current of 5.0A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of running the CPU or the operating program.

It can store data for 5 different batteries per charger (20 in total) Input power monitoring when using a 12v car battery source will avoid damage to battery by ending charging automatically if voltage drops below the required limit.

Spec Check:

* Operating voltage range - DC 11-15V
* Power Source - 12V DC (recommended 20-30A 12V Power Supply)
* Charge Power - 50Watts, current is regulated accordingly (e.g. 11.1V battery, charge current approx. 4.5A)
* Discharge Power - 5 watts, current is regulated accordingly
* Cell Count - 1-15 NiCd/NiMH cells, 1-6 LiPo/LiIon/LiFe cells, 1-10 Lead acid (2-20V)
* Current Drain for balancing lithium - 300mA
* Charger Dimensions - 225.4 x 158.6 x 62.4mm
* Net Weight - 1.09kg


Will peform 1 to 5 cycles of charge/discharge or discharge/charge.

(please note performance and charging capability depends on power input source. To charge 4 batteries at maximum power, will require 20-30amp power supply. Alternatively a lower power source may allow 2 batteries to be charged while 2 are discharged. A poor power source will result in reduced charging performance)

Lien CML Distribution

ça c'est excellent

tu peux charger plusieurs accus en meme temps , top du top !!!

moai,plusieurs sorties mais sous 5 ampères donc bof bof

Il me plait bien cet engin. Pour charger plusieurs accus Li-Po de faible capacité (entre 400 et 1500 mah), c'est exactement ce qu'il me faudrait.

en même temp ou a la suite je suis encore plus nul en anglais quand français ? par ce que je m'etais renseigner pour un chargeur d'atelier et même les plus gros charge a la suite mais pas en même temp. il faisait de memoir dans les 250 euros

Dite, ya pas un air bizarre de resemblence ?:
http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=10327&Product_Name=Hobby_King_Quattro_4x6S_Multi_Charger_
Je crois que robbe a fait le meme aussi... a voir...

Tchous !

le Robbe c'est un 3 sorties

ha autant pour moi alors